Able

Able Requirements


1. Ideals


a. Organize and conduct two impressive opening and closing ceremonies for your ship.
b. Explain how our nation’s maritime history has contributed to our way of life.
Note: “Explain” means to convey information to one or more people using any of the
following methods (or something similar approved by your Skipper): video, computer
slide show (PowerPoint presentation), storyboard (project board display), diorama, model,
annotated photo album, verbal report, or written report. For comparison purposes, a
written report of 500 to 1,000 words would form an appropriate explanation.


2. Active Membership


a. Meet your ship’s bylaws requirement for active participation in your ship’s meetings and
activities for six months.
b. Prepare and present a program on Scouts BSA troop, Venturing crew, Venturing
Officers’ Association meeting, Cub Scouts, Order of the Arrow, Maritime Explorer,
University of Scouting session School; class, or other youth group. Your presentation
should last a minimum of 15 minutes and describe the activities of your ship and Sea
Scouts.


3. Leadership


Either serve and fulfill the responsibilities of a crew leader or an elected officer of your ship,
or serve as an activity chair for two major ship events. Responsibilities should include
planning, directing, and evaluating the event. (These events are in addition to the Ordinary
requirement.)
or
With a boat operator plan a boat dive trip and include all equipment, provisions and location.
Using navigation charts to determine course to the location and topographical charts of the
sea floor create a dive plan for the participants making the dive.


4. Swimming


Pass all requirements for the Scouts BSA’s Lifesaving merit badge.


5. Safety


a. Develop and use a customized vessel safety checklist for a boat used by your ship.
b. Demonstrate your understanding of fire prevention on motorized vessels.
or
Explain how entanglements or entrapments, such as but not limited to loose ropes and
difficult to remove sprayskirts, can be avoided in kayaks, canoes, paddleboards and rafts.
c. Know the classes of fires and the substances that will extinguish each type of fire.Change 6 – February 2022 Advancement and Recognition 55
d. In a safe place, under adult supervision, demonstrate your ability to successfully
extinguish a class A and a class B fire with an approved fire extinguisher. If required, see
that the fire extinguisher used is properly recharged or replaced.
e. Conduct a fire safety inspection of the vessel normally used by your ship or of your
ship’s meeting place. Note any fire hazards and report them to your ship’s adult leaders.
f. Complete the certification for standard first aid through the American Red Cross, the
American Heart Association, or other approved organization’s standard first-aid course.
or
Obtain certification from DAN®’s Professional Diver first aid course or an equivalent
USCG approved course.
g. Complete the certification for CPR through the American Red Cross, the American Heart
Association, or other approved organization’s course.

6. Marlinspike Seamanship


a. Complete a back splice, eye splice, short splice, long splice, and a palm-and- needle
whipping.
b. Sew a flat seam, round seam, and grommet eye in canvas or sail material. Describe how
each is used in construction of and the care of sails.
c. Describe the parts of a block and explain how blocks are sized. Describe the following
types of tackle: luff, gun, double purchase, single whip, and runner. With the help of
another shipmate, reeve a double purchase tackle.
Or
On land, establish a 2-point load-distributing anchor point and a 3:1 mechanical
advantage system (e.g., Z-drag) used to unpin paddlecraft. Use the system to haul a
weight at least 5 feet across the ground. The system must include a progress capture
system and a damper.


7. Boat Handling


a. Demonstrate your ability to properly operate a small boat equipped with a motor.
Included should be fueling, starting, leaving a dock, maneuvering, docking, and coming
alongside.
or
In a human propelled vessel, board the vessel and depart from shore, paddle or row the
vessel in a straight line forward 200 feet and backwards 40 feet; spin in place 180 degrees
or more to right and left; and move sideways 10 feet or more to right and left (only if the
vessel uses paddles). Then, while underway, turn 90 degrees to right and left while
maintaining headway and maneuver through a figure of 8 course with markers set three to
four boat lengths apart. Finally return to shore and disembark the vessel. At all times,
maintain proper trim and balance.
b. Know the names and functions of lines used to secure a vessel to a wharf or pier.
c. Understand and execute docking commands used in handling lines on your ship’s primary
vessel.
or
Demonstrate landing your paddlecraft parallel to the shoreline, perpendicular to the
shoreline or parallel to a dock.


8. Ground Tackle


a. Describe the various kinds of anchor rode and the advantages and disadvantages of each
type.
b. Identify the parts of the anchor cable starting with the anchor and ending at the vessel.
c. Describe the methods of marking chain or rode and demonstrate that you know the chain
or rode markings on your ship’s vessel.
d. While on a cruise assist in the construction of an anchor watch schedule and stand one
watch.Change 6 – February 2022 Advancement and Recognition 56
or
Establish a watch for boats secured to a shore or beach and stand one watch.
e. Identify a capstan or windlass and explain its use in handling line, wire rope, or chain.
9. Navigation Rules
a. Demonstrate a working knowledge of Navigation Rules, International and Inland.
b. Explain vessel lights and day shapes for the following: towing (astern, alongside, pushing
ahead, and cannot deviate), fishing, trawling, restricted maneuverability, not under
command, underwater operations, constrained by draft, dredging, aground, and sailing
vessels under power.
c. Understand the system of aids to navigation employed in your area. Include buoys, lights,
and daymarks, and their significance and corresponding
chart symbols.
d. Read in detail a National Ocean Service (NOS) chart, preferably for the area normally
cruised by your ship, identifying all marks on it.
10. Piloting and Navigation
a. Supervise the proper keeping of a complete deck log for three days of cruising (one cruise
or a combination of day cruises). Submit the cruise logs to your Skipper.
or
Keep a journal of paddling trips that includes names of participants, access points,
waterway description, and notable events. Record at least three trips in the journal and
submit to your Skipper.
b. Lay a course of at least three legs and execute it using dead reckoning.
or
Make a scuba dive, navigating three legs underwater using a compass, measuring distance
and time, and logging all information Use a chart to plan depth and topography.
c. Demonstrate your ability to fix your position by the following methods: taking bearings
from two known objects, running fix, and estimated position.
d. Establish distance from a known object using “double the angle on the bow” and explain
how to set a danger bearing.
e. Enter three waypoints into an electronic navigation device (i.e., GPS, chart- plotter) and
navigate your vessel to each point. Demonstrate the use of the MOB function on your
electronic navigation device.
f. Discuss how radar is used in situational awareness and the method of taking a radar fix.
g. Explain the use of tide tables, current tables, and light lists, and how to update a chart using
the Notice to Mariners.
11. Practical Deck Seamanship
a. Demonstrate your knowledge of personal safety equipment needed while cleaning,
maintaining, or repairing your vessel.
b. Know the names, uses, sizes, and proper care of the common hand tools used by your ship.
c. Identify and explain the use of the following: thimble, shackle, turnbuckle, pelican hook,
and other ship’s hardware and fittings commonly used aboard your ship’s vessels.
d. Demonstrate proper surface and coating preparation, coating techniques, care of stored
coatings, and cleaning of brushes and tools used to maintain surfaces on your ship’s vessel.
or
Demonstrate how to make a minor repair on a paddlecraft used by your ship.
e. Explain techniques used for the maintenance, protection, and repair of hulls and decks on
your ship’s vessel.
or
Explain the techniques used for the maintenance, protection and storage of paddlecraft used
by your ship.


12. EnvironmentChange


a. Demonstrate your knowledge of local environmental laws related to the proper storage,
disposal, and cleanup of maritime coating materials, fuels, and other environmentally
sensitive materials.
b. Discuss with an adult leader the dumping of garbage in the marine environment. Review
the contents of the MARPOL placard and locate it aboard your ship’s vessels.
c. Explain the importance of protecting marine endangered species using a representative
species as an example (mammal, bird, fish, or reptile). As a minimum, include a
description of the species; its habitat, history, and current population numbers; and
current steps being employed to help its recovery. Note: Refer to the definition and
expectation for “explain” in Able 1b.


13. Weather


Demonstrate your ability to read a barometer, thermometer, anemometer, and weather vane.
Be familiar with the Beaufort Wind Force Scale.


14. Cruising


Earn the Long Cruise badge.


15. Electives


Choose any four level 2 or higher electives.

Boy Scouts of America – Sea Scout Manual – Updated with Change 6 – February 2022 .